高信赖性触控方案
PM电阻控制器电阻式控制 IC电阻式PenMount IC 提供给客户自行设计到系统主机上，其种类有RS-232 和 USB 二种接口。*PenMount 6000: RS232 & USB 界面*PenMount 9000: RS232 界面所有的控制 IC 都包含驱动程序，并支持4, 5, 8线电阻式触控面板。PenMount 6000 触摸屏控制芯片组 (RoHS Compliance)PenMount 6000 是一款拥有高效能的触控控制器，内含即插即用的功能符合最新操作系统的趋势。是采用 USB 及 RS-232 界面的高性能触摸屏控制晶。PenMount 6000 内含 10-bit A/D 转换器，适合高密度电路设计。
PenMount 6000 Hardware Data
Touch Screen:
4, 5 , 8-wire
Package:
28-pin QFN
Communications:
RS-232 19200 / 9600 baud rateUSB Full-speed, 12Mbps
Feature:
· High-speed pipelined 8051-compatible microcontroller core (up to 25MIPS)
· True 10-bit ADC with analog multiplexer
· On-chip Voltage Reference and Temperature Sensor
· On-chip Voltage Comparators
· 12 MHz internal oscillator
· On-chip FLASH memory
· USB, UART interfaces implemented in hardware
Sample Rate
160 points per second (minimal)
Resolution
1024×1024
Resistance Range :
50~1.3K ohm
Operating Voltage:
+3.3V ~ +5V DC ± 5%
Operating Temperature:
-40 ℃ to +85 ℃
Storage Temperature:
-65 ℃ to +150 ℃
Power Consumption
Standby Mode : 13.4 mA ; Active Mode : 24.6 mA(VCC=+5V, Top sheet Panel Resistance: 274Ω;Bottom sheet Panel Resistance: 770Ω)
PM6000 Controller Driver Software*RS232 interface：DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 /8, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux (Kernel 3.x and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5*USB interface：Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 /8, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux OS (Kernel 3.x and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)PenMount 9000 触控屏幕控制器芯片组 (RoHS Compliance)PenMount 9000 是采用 RS-232 界面的高性能触摸屏控制芯片组，内含 A/D转换器符合需要自制电路板的需求。除此之外这些个别控制单元，适合大型触控式面板的区域补偿。PenMount 9000 支援 4 线、8 线、5 线触控式面板使用。
PenMount 9000 Hardware Data
4, 5 & 8 wire
32-pin TQFP
RS-232 interface
Nature:
8-bit RISC microprocessor with built-infunctions including 10-bit ADC, UART, Timer, Counter, Comparator, Watchdog, Memory, etc.
DC +5V
Power Consumption:(at 4 MHz, 3V)
Standby Mode : 16 mA ; Active Mode : 27.5 mA( VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm )Note. Actual current will be different by touch panel’s resistance.
Please refet to the data sheet describing ATmega8L-8AU from ATMEL for more detail.PM9000 Controller Driver Software*DOS, Windows 3.1/ NT4.0/*Windows 98/ Me/*Windows 2000/ XP/ 2003/ 2008/ Vista/ 7/ 8,*Linux (up to kernel 3.x), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5,*Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform);*Solaris 10/11电阻式触控控制板PenMount 触控面板控制板适用于不同的应用，我们设计时就将不同界面与支持 4, 5, 8 线式的电阻式触控面板控制板分开，让客户方便采用已经选定的电阻式触控面板。PenMount 电阻式单点触控面板控制板有数款设计的控制板，供客户选择：*PM6300A : USB 介面，支援4、8 或5 线式触控萤幕*PM6500A : USB 介面＆ RS232 介面，支援4、8 或5 线触控萤幕*PM6202B : USB 介面＆ RS232 介面，支援4 或5 线式触控萤幕*PM9026BH : RS232 介面，支援4、8 线式触控萤幕*PM9036CH: RS232 介面，支援4、8 或5 线式触控萤幕PenMount 触控萤幕控制器皆支援各种作业系统的驱动程式RS-232 控制板PenMount RS-232 系列的控制板一共有两款：*PM9026BH : 支持 4、8 线式的触控屏幕，它的驱动程序支持全部的 Microsoft 和 Linux 操作系统平台具，备touch 的 LED 显示灯。*PM9036CH : 可以选择支持 4 、8 线或 5 线式触控屏幕。
PM9026BH Control Board
Touch Screen
For 4- & 8- wire analog resistive type
Communications
Baud Rate
19200 baud rate fixed, N81, PnP mode
Touch Screen Controller
PenMount 9000 microcontroller
Resistance Range
50~1.3K Ω
2048×2048
Diagnostic
LED on board
Electrostatic Discharge (ESD)
Air Discharge 15KVContact Discharge 8KV
Operating Voltage
5V to 12V DC
Operating Temperature
0℃ ~ 50 ℃
Size
60 (L) x 20 (W) x 8.3 (H) mm
Standby Mode : 15 mA ; Active Mode : 26.5 mA( VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm )Note. Actual current will be different by touch panel’s resistance.
PM9026BH control board is designed to have a very small mechanical size in order to be located inside the system easily. PM9026BH board is supporting 4- and 8-wire touch screenPM9026BH Driver SoftwareOS, Windows 3.1/ NT4.0, Windows 98/ Me, Windows 2000/ XP/ 2003/ 2008/ Vista/ 7/ 8, Linux (up to kernel 3.x), QNX 6.2/6.3.2/6.4.1/6.5, Windows CE 5.0/ 6.0 (for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform); Solaris 10/11________________________________________PM9036CH Control Board
For 4, 8-wire or 5-wire analog resistive type
Interface
RS-232
19200 baud rate selection, N81
Mode selection
PnP mode
Power Input:
+5V DC
-20℃ ~ 70 ℃
Storage Temperature
-40 ℃~ 85 ℃
Mechanical Size
60×26 mm, two 3φ screw holes
PM9036CH Driver SoftwareDOS, Windows 3.1/ NT4.0, Windows 98/ Me, Windows 2000/ XP/ 2003/ 2008/ Vista/ 7/ 8, Linux (up to kernel 3.x), QNX 6.2/6.3.2/6.4.1/6.5, Windows CE 5.0/ 6.0 (for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform); Solaris 10/11________________________________________USB 控制板PenMount USB 系列的控制板一共有一款：*PM6300APM6300A 支援四、八 或 五線式的觸控螢幕，它們的驅動程式支援全部的 Microsoft 和 Linux 作業系統平台，都具備 touch 的 LED 顯示燈。________________________________________PM6300A Control Board
USB Full-speed, 12Mbps
PenMount 6000 controller IC
Cursor accuracy
< 1% (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support)
Electro Static Discharge (ESD)
Air Discharge 15KV ,Contact Discharge 8KV
Standby Mode : 13.4 mA ; Active Mode : 21.5 mA(VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm)Note. Actual current will be different by touch panel’s resistance.
PM6300A Driver SoftwareWindows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 /8, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux OS (Kernel 3.x and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)RS-232 & USB 双模控制板PenMount Combo 控制板（RS-232 & USB）一共有二款，这二款 PenMount Combo 控制板均可以自动侦测 USB & RS-232 接口，而且全部支持 4、5、8 线式电阻式触控屏幕；PenMount 提供的驱动程序更能自动侦测安装适合的驱动程序。*PM6500A*PM6202B这二款 PenMount 触控控制板均使用包含 10-bit A/D 的全功能 PM6000 触控控制 IC，您也可以选择另外设计12-bit ADC。在控制板上有两个连接器，一个连接 4、5、8 线式电阻式触控屏幕，另一个连接 USB & RS-232 接口。________________________________________PM6202B Control BoardPM6202B CZ4 Control Board
PM6202B CW4 Control Board
PM6202B CW5 Control Board
For 4- or 5-wire analog resistive touch screens
USB
Full speed 12MHz bps
RS232
9600 baud ratenon-PnP mode
Dimension holes
(L)70.0mm x (W)20.0mm x (H)10.3mm (max), two 3.0 φ screw
Connector
ZIF connector or Wafer connector on board for touch screen
< 1% (Active Area Diagonal of touch screen withPenMount Advanced calibration utility support)
Resistance range
30 ~ 1.3K ohm
Standby Mode : 13.8 mA ; Active Mode : 21.8 mA( VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm )Note. Actual current will be different by touch panel’s resistance.
Electro Static Discharge(ESD)
Air Discharge 15KV , Contact Discharge 8KV
-40 ℃ ~ 85 ℃
-20 ℃ ~ 70 ℃
PM6202B Driver Software*RS232 interface：DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 /8, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux (Kernel 3.x and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5*USB interface：Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 /8, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform ), Linux OS (Kernel 3.x and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)________________________________________PM6500A Control Board
Full speed 12Mbps
19200 baud rate, N81PnP mode
LED
Standby Mode : 14.4 mA ; Active Mode : 22.5 mA(VCC=+5V, Top sheet Panel Resistance: 365 ohm; Bottom sheet Panel Resistance: 660 ohm) Note. Actual current will be different by touch panel’s resistance.
PM6500A Driver Software*RS232 interface：DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 /8, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform), Linux (Kernel 3.x and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5*USB interface：Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7 /8, Windows CE 5.0/ 6.0(for X86, Armv4, Armv4i platform), Windows Embedded Compact 7/ 2013(for X86, Armv7, MIPSII platform ), Linux OS (Kernel 3.x and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)
